TVLogic

Monitor LVM-171SA

MFR #TVL-LVM-171SABLK #395-0061
Price: € 2767.00 + VAT
Online price: € 2656.32 + VAT
✓ Installment payments by credit card.
⌦ Not in stock. Available in 15working days.

  • Preview Monitor 
  • LCD IPS 16.5" 10bit 1920x1080Pixel
  • 3G/HD/SD-SDI IN/OUT
  • HDMI, DVI-D & YPbPr IN
  • Ethernet and RS-422 connections
  • Contrast: 1500:1 - Brightness: 450nits
  • Focus Assist / WFM / Vectorscope
  • High Quality

Share this product

LVM-171SA

The new LVM-171S is our top QC-Grade 17” model with a 16.5 inch IPS LCD panel with 1920x1080 native resolution, wide-gamut reproduction (up to DCI-P3), enhanced contrast ratio and wide viewing angle all unmatched by other LCD monitors. A completely redesigned video processing unit provides powerful dual-channel performance and artifact-free image reproduction. Support for various cinema camera log-to-linear LUTs, easy field upgradability and a full array of image processing features are standard.

10-bit Wide color Gamut and Wide viewing angle.

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Displays the Timecode information on the screen.Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.
Key Lock

Displays the Luma(Y’) level of the input image in colors. Each pixel’s Y’ analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen.

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Anahlyzes the input signal’s Luma(Y’) and chroma information(C’) and if the input signal exceeds the designated minimum value and maximum value, the pixel shall blink. This function is to help the user to easily find out any unwanted levels of signals and for a better exposure setting.

Displays the Timecode information on the screen.

Adjusts the Width /Height display ratio.

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

Magnifies the input signal from 0% to 90%.

Applies the LUTs to the outbound Log signal. A LUT for every major camera manufacturer has been included(LOG-C, C-LOG, S-LOG 1,2,3 and RED Gamma 3,4).

Displays user customized 8 characters or source ID or Tally signal of Ancillary (ANC) data on the screen.


Source: http://www.tvlogic.tv/new/M_Spec.asp?sidx=93