Divider: 1 stock: 4 title: Pol 3M
Divider: 1 stock: 0 title: NTG3 Shotgun
Divider: 1 stock: 11 title: PSK-7
Divider: 1 stock: 3 title: Blimp-Rycote
Divider: 1 stock: 0 title: SKP-500-G4-BW
Divider: 1 stock: 0 title: EK-100-G3-BX
Divider: 1 stock: 2 title: BoomPole-Bag
 

Rode

Kits Boom-Set-Rode-NTG3-W

Τιμή: € 1640.36 + ΦΠΑ
Online τιμή: € 1574.75 + ΦΠΑ
✓ Σε 6 άτοκες δόσεις ή μέχρι 36 έντοκες δόσεις.
⌦ Ρωτήστε μας για διαθεσιμότητα.

  • Microphone Boom Set Wireless
  • Microphone Gun Rode NTG-3
  • Boom Rode Blimp
  • 3m Boom Pole 

Μοιράσου το προϊόν

Boom-Set-Rode-NTG3-W

NTG-3
Type: Supercardioid microphone Shotgun
Frequency: 40HZ - 20KHZ
Impedance: 25 Ohm
Sensitivity: 1V/Pa
Weight: 163g
Connector: XLR(3-pin)
Dimensions: Length:255mm
Includes: Wind Shield, Water resistant aluminium storage cylinder, Zip pouch, Microphone clip


Rode Blimp
The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length. Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

The Blimp’s handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone. With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or DeadWombat fitted).

The Blimp attaches to any standard boompole via 3/8" thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight. The Dead Wombat windshield, caring brush and tail/patch cable are included. The added confidence of a full ten year warranty* ensures that the Blimp is by far the best microphone windshield system available, further evidenced by a 2009 Red Dot Award and Australian International Design Award for outstanding product design. *Excludes normal wear and tear of Dead Wombat furry cover or any misuse, modification or improper storage and transportation of the product.

SKP-300G3-BX

Flexibility is the outstanding feature of this plug-on transmitter that turns every wired microphone into a freely mobile wireless one. Thank to its phantom powering the SKP 300 G3 can be used with condenser and dynamic microphones alike. With up to 24 parallel frequency banks, switchable transmission power, wireless synchronization via infrared and, last but not least, its sturdy metal housing the SKP 300 G3 is perfectly fit for the demanding professional routine. And a crystal-clear sound is provided by the HDX compander.

EK-100-G3-ΒΧ

Portable components always work easiest when you do not have to think about them. This was the basis on which the EK 100 G3 was developed. Its adaptive-diversity technology provides excellent reception at all times. This receiver is designed to securely attach to a camera's shoe using a clamp mount. The EK 100 G3 also can synchronize to a G3 transmitter with a simple push of a button. The EK100G3 is compatible with the optional DC 2 external adapter for extended use without batteries where a 12VDC source is available.