Accepted Payment Methods
Beachtek
Audio Mixer DXA-SLR-Mini
MFR #DXA-SLR MINIBLK #285-0005
Τιμή:
€ 133.63 + ΦΠΑ
Online τιμή:
€ 128.28
+ ΦΠΑ
✓ Σε 6 άτοκες δόσεις ή μέχρι 36 έντοκες δόσεις.
- Portable Audio Mixer
- 2x mono Jack 3.5mm input
- 2x stereo Jack 3.5mm input
- 1x Jack 3.5mm output to camera
- 1x Headphone Jack 3.5mm output
- VU meter
- 9V battery - 3h operation
- 2-year Warranty
DXA-SLR-Mini
The DXA-SLR MINI provides full audio control and monitoring features for HDSLR cameras and is the ideal interface for wireless audio gear or mics with mini-plug connectors. Has the same great features as its big brother DXA-SLR PRO less the XLR connectors and phantom power features which are not required for these mics.
Allows you to connect and two mono mics for two channel audio or one stereo mic for stereo audio. Low noise preamps provide superb audio with fast acting limiters to reduce the chance of clipping. Easy to read VU meters make setting the proper recording levels a snap while the headphone output lets you monitor audio as you record. A unique AGC Disable feature controls the wild swings of the Auto Gain Control that plague many cameras. This reduces the noise during quiet moments of recording allowing you to record two channels of clean audio.
Fits neatly under any camera and can also be mounted to a tripod. Operates on one 9 volt battery.
Inputs
• Two mono mini-jack connectors
• One stereo mini-jack connector
• Loop back for playback monitoring
Outputs
• Unbalanced stereo mini-jack for connection to the camera
Headphone Monitor
• Built-in headphone amplifier with volume control
• 3.5 mm phone jack
Auto Gain Control Disable
• Controls the wild swings of the AGC in the camera to reduce hiss
VU Meter
• Easy to read level meters indicate proper signal level for each channel
LIMTERS
• Fast acting limiters prevent distortion from overly hot inputs
Gain Switch
• High / Low gain setting for each channel
Level Controls
• Adjusts signal level output on each channel
Low Noise Preamplifiers
• Exceptionally low noise circuitry for superb audio
• Wide-bandwidth for full rich sound
Playback Monitor
• Provides an easy way to monitor audio on playback
Power
• Easily replaceable 9 volt battery
• Low battery indicator
Case
• Sturdy die-cast aluminum enclosure
Maximum Input Level
+4 dBu
Output Level
Nominal MIC levels
Frequency Response
20 Hz to 20 kHz (+/- 0.5 dB)
THD
Less than 0.01% @ 1 kHz, -30 dBu input
S/N Ratio
85 dB @ 1 Khz, -30 dBu input
Gain
LO gain: 0 dB
HI gain: 20 dB
VU meter
-18 to +3 dB in 3 dB increments
Battery Type
One 9 volt alkaline or lithium battery
Battery Duration
3 hours typical with alkaline battery
8 hours typical with lithium battery
Allows you to connect and two mono mics for two channel audio or one stereo mic for stereo audio. Low noise preamps provide superb audio with fast acting limiters to reduce the chance of clipping. Easy to read VU meters make setting the proper recording levels a snap while the headphone output lets you monitor audio as you record. A unique AGC Disable feature controls the wild swings of the Auto Gain Control that plague many cameras. This reduces the noise during quiet moments of recording allowing you to record two channels of clean audio.
Fits neatly under any camera and can also be mounted to a tripod. Operates on one 9 volt battery.
Inputs
• Two mono mini-jack connectors
• One stereo mini-jack connector
• Loop back for playback monitoring
Outputs
• Unbalanced stereo mini-jack for connection to the camera
Headphone Monitor
• Built-in headphone amplifier with volume control
• 3.5 mm phone jack
Auto Gain Control Disable
• Controls the wild swings of the AGC in the camera to reduce hiss
VU Meter
• Easy to read level meters indicate proper signal level for each channel
LIMTERS
• Fast acting limiters prevent distortion from overly hot inputs
Gain Switch
• High / Low gain setting for each channel
Level Controls
• Adjusts signal level output on each channel
Low Noise Preamplifiers
• Exceptionally low noise circuitry for superb audio
• Wide-bandwidth for full rich sound
Playback Monitor
• Provides an easy way to monitor audio on playback
Power
• Easily replaceable 9 volt battery
• Low battery indicator
Case
• Sturdy die-cast aluminum enclosure
Maximum Input Level
+4 dBu
Output Level
Nominal MIC levels
Frequency Response
20 Hz to 20 kHz (+/- 0.5 dB)
THD
Less than 0.01% @ 1 kHz, -30 dBu input
S/N Ratio
85 dB @ 1 Khz, -30 dBu input
Gain
LO gain: 0 dB
HI gain: 20 dB
VU meter
-18 to +3 dB in 3 dB increments
Battery Type
One 9 volt alkaline or lithium battery
Battery Duration
3 hours typical with alkaline battery
8 hours typical with lithium battery
